Resene Flexicover E is a thixotropic waterproofing membrane designed for thick application over cracked concrete surfaces. Thixotropic means it is a coating material that, while free-flowing and easy to manipulate under the brush, sets to a gel within a short time when it is allowed to remain at rest. It is made using acrylic elastomers that have excellent 'memory' of their original shape when distorted, which gives the product incredible movement and crack bridging capabilities, enabling it to bridge gaps up to half the thickness of the paint film.
It is used on very similar substrates to Resene Thixalon 5 (see Data Sheet D63), however Resene Flexicover E is the only product that performs well over badly cracked and deteriorating substrates and is therefore recommended over propagating cracks - that is, when cracks are getting worse and/or new ones are appearing. This product will resolve many less than perfect substrates; however there can be no real guarantees to its success on really poor substrates. It is able to be applied at very high thicknesses without sagging or film cracking and is best applied by brush, roller, goop loop (for a textured effect) or spray.
Resene Flexicover E has a semi-gloss finish but like all elastomeric coatings is more prone to dirt pickup than standard coatings. This may be easily overcome with a final coat of a standard waterborne topcoat such as Resene Lumbersider (see Data Sheet D34) or Resene X-200 waterproofing membrane (see Data Sheet D62).
Resene Flexicover E is available in Resene Total Colour System white, off whites and pastels.作者: 玉树临风 时间: 2014-9-27 07:34:03
Resene X-200 is a waterborne weathertight membrane that is used either on its own or under Resene textures such as Resene Resitex (see Data Sheet D70) or Resene Sandtex (see Data Sheet D71). It is perfect on concrete, blockwork, fibre cement sheeting and solid plaster, where weathertightness is required. Resene X-200 may be brushed into small cracks (less than 1mm) to prevent moisture entering the damaged substrate. For cracks 1-2mm use Resene Brushable Crack Fill.
Resene X-200 has a lightly textured low sheen finish, in keeping with current trends for lower gloss finishes. It is easily applied and has excellent durability. Available in a wide range of colours, colours off white and pastel tone are available for tinting in store. Colours off light, mid and deep tone are available for tinting ex factory and other colours are available on request - minimum batch sizes may apply.作者: 玉树临风 时间: 2014-9-27 07:43:06