【图片】：Oct 22nd: 华人同乐日 Labour Monday @ Pukekohe

sky9

sky9

喜欢摩托的朋友可以看这个连接
http://bbs.skykiwi.com/forum.php?mod=viewthread&tid=2131485&extra=page%3D1

sky9

还有其他专业的照片：

ilmaro

今天真是热闹。。。。。。

tongandyu

A8酱油车~~~~~

sukesl25

A8酱油车

韵儿

照片好帅啊！

sky9

韵儿 发表于 2012-10-23 08:34
照片好帅啊！

是因为你车够帅~！

韵儿

你车更帅啦！好想要你的throttle body and intake manifold。。你有没有多余的要卖呀？呵呵

jinxin56

a8老帅了，19号的honda也巨猛

韵儿

jinxin56 发表于 2012-10-23 09:11
a8老帅了，19号的honda也巨猛

19号是Honda cup最大的赞助商motul的老板，老先生现在越来越快了还说要我们尊老让他先过要是超了他以后就不跟我们说话了，挺搞笑的。不过那台天蓝迷彩的ek真是超级无敌快啊，看来他想赢2000cc组了。

riderkuuga

好热闹啊·········

178654837

韵儿 发表于 2012-10-23 08:34
照片好帅啊！

韵儿哪台车啊。buddyclub dc5？ 我记得是69式的车嘛~

韵儿

178654837 发表于 2012-10-23 15:26
韵儿哪台车啊。buddyclub dc5？ 我记得是69式的车嘛~

是的，69进化版，哈哈

taitcw

韵儿 发表于 2012-10-23 09:43
19号是Honda cup最大的赞助商motul的老板，老先生现在越来越快了还说要我们尊老让他先过要是超了他以后就 ...

Agree.

Lot of good parts in the car too, suspension and setup etc.

sky9

taitcw 发表于 2012-10-23 22:07
Agree.

Lot of good parts in the car too, suspension and setup etc.

he showed me under bonnet... I was like.. ... !! umm...

sky9

韵儿 发表于 2012-10-23 09:43
19号是Honda cup最大的赞助商motul的老板，老先生现在越来越快了还说要我们尊老让他先过要是超了他以后就 ...

Motul DC5, Richard EK 也到了 1:06 / 1:07 地步。。。怎么跑。。。

sky9

韵儿 发表于 2012-10-23 08:58
你车更帅啦！好想要你的throttle body and intake manifold。。你有没有多余的要卖呀？呵呵

我的intake manifold = DC5 原厂的~！用CL7 不是更好吗？
Throttle Body = Spoon 其实就Local 磨大而已~！

sky9

韵儿

sky9 发表于 2012-10-23 22:52
Motul DC5, Richard EK 也到了 1:06 / 1:07 地步。。。怎么跑。。。

减重啦只能，Colin 也是1：07了听说。。他们都只有1000kg多。我豁出去啦，这两天赶快改exhaust throttle intake，不然没的玩啦。

韵儿

sky9 发表于 2012-10-23 22:54
我的intake manifold = DC5 原厂的~！用CL7 不是更好吗？
Throttle Body = Spoon 其实就Local 磨大而已~ ...

Oh I see! Factory one bored out to 70mm?

shaB

顶个~

Fullhappysky

好帅啊(☆_☆)

taitcw

韵儿 发表于 2012-10-23 23:07
Oh I see! Factory one bored out to 70mm?

Spoon TB for DC5 is using Venturi design.

Inlet, bore to 70mm.
then taper to the butterfly (I think that is the same as stock, 62mm but I could be wrong).
Outlet bore to ~65mm (not exactly sure about diameter but opening is bigger than stock).

There are other TB that is straight 70mm or even bigger.

As you know changing TB diameter and intake manifold, changes air speed, will gain in one rev range and lose in another.

韵儿

I was going to get the skunk2 TB but jacky said its too big, I just got the old setup he had and put it on, I can feel more power already!

taitcw

韵儿 发表于 2012-10-24 15:38
I was going to get the skunk2 TB but jacky said its too big, I just got the old setup he had and put ...

Yes I think some tuners have tested the effect of big bore TB on K20A with dyno.

The gain was very little.

TSX (Accord CL9?) is using 64mm TB, maybe can try those?

miclai

just get a larger final drive

CS汽车音响

帅帅帅帅

韵儿

taitcw 发表于 2012-10-24 16:04
Yes I think some tuners have tested the effect of big bore TB on K20A with dyno.

The gain was v ...

Factory dc5 already 64mm, I got cl7 ported to 70mm now, apparently it's 20gain with just the TB  and tune.