建车库

k126

想建个车库，有什么好介绍的吗？谢谢

送你一枚钻戒

自己动手的撒花，和哥哥一起来diy吧~~

kung8

Skyline or Versatile, Kitset DIY or contact builder, up to your buget and CAN DO.

Invisible

送你一枚钻戒 发表于 2013-1-28 08:47
自己动手的撒花，和哥哥一起来diy吧~~

等着上传照片，支持DIY的哥哥

穿开裆裤的猪

送你一枚钻戒 发表于 2013-1-28 08:47
自己动手的撒花，和哥哥一起来diy吧~~

钻戒哥你的sleep out盖得怎样了？

送你一枚钻戒

穿开裆裤的猪 发表于 2013-1-28 12:42
钻戒哥你的sleep out盖得怎样了？

最近整花园。。刚弄好了个花房，在整院子，各种种树，两周内要起个车库，车没地方停了。。。

Invisible

送你一枚钻戒 发表于 2013-1-28 14:56
最近整花园。。刚弄好了个花房，在整院子，各种种树，两周内要起个车库，车没地方停了。。。

两周一个车房。这叫速度。厉害 换了我又地耗上个一年了。

UV15

送你一枚钻戒 发表于 2013-1-28 14:56
最近整花园。。刚弄好了个花房，在整院子，各种种树，两周内要起个车库，车没地方停了。。。

你盖3个车库也就基本够停。

雷蒙德

我觉得车库require a building consent:最好要注册的builder给你盖(LBPs)


但是关于 盖Carports 你可以看看 下面，自己就能盖 ，上youtube 可以看一下  搜索build carport
A building consent is not required for the following building work:

    (jf) the construction, installation, replacement, alteration, or removal of a carport that does not exceed 20 square metres in size and is on the ground level.

Guidance

This exemption provides for a simple roofed structure that will be used for motor vehicle storage. To be regarded as a carport, as opposed to a garage, at least one side must remain open to the outdoors at all times.
Examples where this exemption could apply         Examples where the work is not exempt and a building consent is required
Construction of a new, lean-to carport attached to an existing dwelling on the ground level, with a floor area of 20 square metres, and three open sides.         Construction of a new (double) carport with a floor area of 35 square metres.
Construction of a 15 square metre free-standing carport which has no walls on the ground level.         
The owner of an old wooden carport 15 square metres in size wants to replace it with a new 20 square metre galvanised steel carport.         

Important note: Always consider spread of fire Building Code requirements and protection of other property when building close to boundaries.

随便说说

对，车库规定改了，所以找人设计再盖较好。Carport用不用申请啊？

justgao

送你一枚钻戒 发表于 2013-1-28 08:47
自己动手的撒花，和哥哥一起来diy吧~~

兄弟你自己在盖sleepout啊 我最近也做磨呢 但没啥经验 有机会能交流下不 给留个电话吧